Neue Turchi 300/F Available Ramme
Sind Sie an diesem Angebot interessiert?
1/19
81.000 €
≈ 76.160 CHF
Marke:
Turchi
Modell:
300/F Available
Typ:
Ramme
Baujahr:
2024
Nettogewicht:
4.800 kg
Standort:
Österreich Yonsbah7346 km von Ihnen
Österreich Yonsbah7346 km von Ihnen
Anzeigendatum:
heute
Angebotsnummer des Händlers:
+380 67 005 0 228
Motor
Marke:
Yanmar 4TNV88
Motorleistung:
35 kW (47.62 PS)
Volumen:
2.190 cm³
Zylinderanzahl:
4
Zustand
Zustand:
neu
Garantie::
1 Jahr
Ferninspektion
Fahrzeugauslieferungen-Service
Weitere Informationen
Farbe:
orange
Wichtig
Dieses Angebot dient nur zur Orientierung. Bitte fragen Sie genauere Informationen direkt beim Verkäufer an.
Hilfreiche Tipps für den Kauf
Kontaktdaten des Verkäufers
Yuri
Sprachen:
Ukrainisch, Englisch
+40 729 49...
Anzeigen
+40 729 497 070
Adresse
Österreich, Steiermark, 8912, Yonsbah
Lokale Zeitzone des Verkäufers:
18:32 (CET)
Kontaktdaten des Verkäufers
Aleanda
Österreich
seit 3 Jahren bei Machineryline
4.5
46 Bewertungen
+40 729 49...
Anzeigen
+40 729 497 070
Verkaufen Sie Maschinen oder Fahrzeuge?
Mit uns - können Sie das tun!
Ähnliche Anzeigen
3
Dimensions closed machine with lifted column: Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide)
Movements hydraulic 1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
Power Oil sets on the machine 180 BAR
Hydraulic system to open cicuit
Hydraulic pump at gear
Capacity oil tank 140 LT
Translation's speed of machine 1,92 3,33 KM/H
Engagement in HP 47,3
Maximum highest post 4.400 mm
HAMMER
Impact power 950/1200 JOULE
Impact rate 620÷1.500/570÷1180
Weight 350kg/450 kg
Oil flow rate 60÷90 LT.-MIN./ 70÷100 LT.-MIN
Power oil sets on the hammer 170 BAR
ENGINE YANMAR 4TNV88:
n° cylinder 4
Swept volume 2.190 CM3
Power at 3.000 RPM 34,4 KW
Power at 2.600 RPM 31,3 KW
Air cooled completed with starting
filter Electric and dry
ACCESSORIES INCLUDED WITH MACHINE - Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm
ACCESSORIES ON REQUEST - Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad
Weight kg 4500
Dimensions closed machine with lifted column: Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide)
Movements hydraulic 1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
Power Oil sets on the machine 180 BAR
Hydraulic system to open cicuit
Hydraulic pump at gear
Capacity oil tank 140 LT
Translation's speed of machine 1,92 3,33 KM/H
Engagement in HP 47,3
Maximum highest post 4.400 mm
HAMMER
Impact power 950/1200 JOULE
Impact rate 620÷1.500/570÷1180
Weight 350kg/450 kg
Oil flow rate 60÷90 LT.-MIN./ 70÷100 LT.-MIN
Power oil sets on the hammer 170 BAR
ENGINE YANMAR 4TNV88:
n° cylinder 4
Swept volume 2.190 CM3
Power at 3.000 RPM 34,4 KW
Power at 2.600 RPM 31,3 KW
Air cooled completed with starting
filter Electric and dry
ACCESSORIES INCLUDED WITH MACHINE - Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm
ACCESSORIES ON REQUEST - Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad