Neue Stiler PIŁA TARCZOWA FORMATOWA Z PODCINAKIEM 2800 MM, TABLE SAW WITH SC Kreissäge

STILER MJ12-2800

The circular saw, thanks to its specification, is suitable for cutting both narrow and thin boards as well as wooden tops up to 100 mm thick. The machine is equipped with many useful functions that allow you to achieve the desired effect in woodworking.
Among others, these are:

Scoring tool for cutting MDF boards
Smooth adjustment of the height of the cutting disc
Blade inclination in the range of 90°-45°
Massive guides with scales, longitudinal (steel) and angular guides as well as table extension as standard.
Additional format table for cutting large-format boards
Sawdust drainage pipe system
Easy and quick replacement of the cutting disc

Technical data:

Continuous motor power S1: 3.0 kW
Power supply: 400V
Dimensions of the main cutting disc (diameter / hole / width): 315 / 30 / 3 mm
Scoring blade dimensions (diameter / bore / width): 90 / 20 / 3 mm
The length of format cutting with a scorer: 2800 mm
Maximum cutting depth at 90°: 100 mm
Maximum cutting depth at 45°: 80 mm
Main disc rotation: 4500 rpm.
Rotation of the scoring disc: 8500 rpm.
Cutting width on the right side: 1350 mm
Blade tilt range: 90° - 45°
Dimensions of the movable table: 2800x270 mm
Table dimensions: 800x385 mm (extension table 800x1265 mm)
Weight: 305 kg

Included:

Machine
A set of tables
Cutting disc
A set of keys to assemble the machine
User manual
CE certificate

Specification:

The circular saw is equipped with two cutting discs, the main and the scoring one.
On the front of the machine you will find a safety switch, a dial height adjustment knob up to 100 mm, a disc tilt lock.
On the other hand, on the side wall you will find a knob for tilting the cutting disc up to 45 °. Hole for connecting the extractor.
The main advantage of the MJ 12 model is a large sliding table with a support. For cutting large format chipboards etc.
Thanks to the additional scoring blade, it is ideal for cutting furniture and chipboards.
A guide with an angle scale allows you to set any cutting angle.
For serial cuts of the same length, the machine is equipped with a side guide with an exact scale.
The saw has a saw blade cover, which can be additionally connected to the extraction.
Replacing the cutting disc is quick and efficient by disassembling the metal top and unscrewing the disc.
The saw has the ability to cut at an angle of up to 45 °.

YOU CAN FIND GUARDS FOR THESE MACHINES AT OUR OTHER AUCTIONS.
The saw is equipped with a rule with an additional measure for measuring and cutting materials with a large surface.
Maximum guide length 2300 mm.
The big advantage is the angular cut of the boards. Thanks to the scale, we can quickly and accurately set the required cutting angle.
The saw has two blades, one main blade measuring 315 mm with a 30 mm hole. And a second 90 mm scoring saw with a 20 mm opening.
It is an ideal solution for precise cutting of furniture boards. The board is cut evenly and without chipping.
The discs are powered by a powerful 3.0 kW 400V motor
The machine control panel is located at the bottom of the saw. There we will find an emergency switch, a knob for angle cuts (45 °) and a knob for adjusting the height of the blade with a lock.
The top table top is 86 cm high.
Two cast iron grinded tops and two widening tops make cutting long elements really quick and convenient.
In addition, the upper tabletop is equipped with a culaga with a scale of the length of the cut material.
The long guide table allows us to cut boards and format boards with a length of 2800 mm.
All guides have scales for length and cutting angles. Thanks to these additional devices, we can quickly set the required angle and cutting length without the need to make additional measurements.
We can connect sawdust and shavings extraction to the table saw (also available in our store). The diameter of the suction port is 100 mm.